english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
CAT C7 C9 3126 포드 엔지니어링 발전기 테스트용 HEUI 주입기 시험 벤치
HEUI diesel injectors are widely used in diesel engines of engineering machinery and generator sets, like CAT C7, C9, C-9, 3126B, 3412E, FORD G2.8, G2.9 and ISUZU etc. To test HEUI injectors, the diesel test bench should be equipped with a HEUI pump, and a special HEUI test fixture and injector adapter are also required. special HEUI test fixture and different HEUI injector adapter HEUI injectors Test Plan 더 보기
CRDI HEUI EUI EUP용 다중 시스템 디젤 연료주입 펌프 테스트 벤치
This Diesel Fuel Injection Pump Test Bench is high end, covers the most popular diesel injection systems in the market, inlcuding CRDI injection system, HUIE injection system, and EUI EUP injection system, could test many different diesel injectors and diesel injection pumps. Operation of this diesel test bench is quite easy, just mount the injector or pump on the bench, then connect pipes and cables well, run the software to start the testing. Testing process is fully 더 보기
A B P VE 시리즈 속도 조절기 캘리브레이션용 디젤 연료 주입 검사기
A classic Diesel Fuel Injection Tester, suitable for the calibration of multi-cylinder in-line pumps and distribution pumps with mechanical speed regulators, such as Ⅰ,Ⅱ, Ⅲ, A, B, P, VE, IW, PL, BQ, Z, P7, PW, PN, PB, P2000, PS7100, EP9, PS8500, P8000, MW, etc. TECHNICAL CHARACTERISTICS: 1 Testing Mode: Manual / Auto 2 Output power: 15 KW 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 Display: LED 6 Fuel Tanks: Diesel Tank & Oil Tank 7 Speed preset quantity 8 8 Length*Width 더 보기
Denso HP6 커먼 레일 펌프 테스터 CR618 전자 디젤 분사 진단
Denso HP6 Injection Pump is available to be tested on a Common Rail Tester. How to test a Denso HP6 Injection Pump on a common rail tester? HP6 pump no. 22100-E0492 Mount the HP6 pump well on the common rail tester. Connect high pressure hose, cable, pipes properly. 3. Run testing software, choose correct pump number, then start the testing. 4. Once finish testing, test result would be displayed automatically. 더 보기
디젤 연료 주입 펌프 테스트 벤치 22KW 스테인리스 듀얼 탱크 공기 압축기
It is a high end Diesel Injection Pump Tester, equipped with a 22kw AC main motor, two stainless steel fuel tanks with two individual motors, beside, there is an air compressor with the tester. except testing mechanical Inline & Rotary injection pump, could also test RED4 pump, Generator electronically controlled governor pump, and check ZME/SCV/IMV valve of electronic pump. MAIN FUNCTIONS: 1 Test conventional mechanical Inline & Rotary injection pump. 2 Test RED4 pump 3 Test 더 보기
Diesel Injection Pump Test Stand for VE Inline Rotary Pump Calibration
Conventional Injection Pump Tester is specially for conventional inline injection pump and rotary pump, inlcuding VE pump. This diesel tester features of highly relaible, durable, and easy-maintenance. Main Configuration : 1 Multi-function control box 2 1 main 22 kw motor, 2 small motors for tanks 3 2 stainless steel tanks, one for fuel and one for oil 4 Air compressor 더 보기
EFI ECU 정밀 제어용 전자 디젤 주입 펌프 시험 스탠드
What is Electronic fuel injection (EFI) system? Electronic fuel injection (EFI) is short for electronically controlled fuel injection. It uses an electronic control unit (ECU) to precisely regulate fuel injection volume, replacing traditional carburetor technology. 1.Core Function The EFI system uses sensors to monitor engine parameters (such as air flow, engine speed, and temperature) in real time. The ECU then calculates and controls the injector's energization timing, 더 보기
일반 철도 연료 주입 시스템 테스트를 위한 전자 제어 HEUI 시험 벤치
The HEUI fuel injection system (Hydraulic Electronic Unit Injector) is a medium-pressure common rail, electronically controlled hydraulic injection system developed by C-aterpillar. It uses engine oil as the hydraulic medium, combined with electronic control and hydraulic drive to achieve high-pressure fuel injection. The most widely used HEUI injectors include CAT C7, C9, C-9, C3126, 3412E,3412A,ISUZU,NAVISTAR and FORD G2.8/G2.9. To test HEUI injector, must need a HEUI 더 보기
KMW A B P 시리즈의 기계 디젤 연료 주입 펌프 시험 벤치
Diesel injection pump tester is basic equipment for a diesel injection laboratory, used to test mechanical injection pump. It could test inline pumps of K, M, MW, A, B, BV, P (ZU, ZW, ZM) and rotor distributor injection pumps EP/VA, EP/VM, VE.F etc. TECHNICAL PARAMETER : 1 Output power: 7.5/11/15/18.5/22 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 or 12 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 800kg 7 Packing Dimension: (H*W*L) 2140*1100*1820 mm 더 보기
