english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
CAT 3126 시리즈 HEUI 디젤 주사기 캘리브레이션 테스트용 주사기 검사기
CAT 3126 is a HEUI injector, which need to be tested on a HEUI Injector Tester. How to test a 3126 HEUI injector on a HEUI diesel injector tester? Choose the adaptor for CAT 3126B injector, mount the injector on the tester manually, connect cables well. 2. Run the testing software and find the corresponding injector number, then start the testing. 3. Whole the testing process is automatic, the result would show within 5 minutes, testing report is available. 더 보기
ISUZU 특수 장착 장치 HEUI 디젤 주사기 캘리브레이션용 주사기 검사기
ISUZU HEUI injector must be tested on a HEUI Injector Tester with special fixture and adaptor. How to test a ISUZU HEUI injector on a HEUI diesel injector tester? Choose the adaptor for ISUZU HEUI injector, mount the injector on the tester manually, connect cables well. 2. Choose the ISUZU test plan to start the testing. Testing report is available After testing finish. 더 보기
나비스타 포드 디젤 캘리브레이션용 멀티 브랜드 CAT ISUZU HEUI 주입기 검사기
Popular HEUI injectors in the market mainly are CAT C7, C9, C-9, C3126, 3412E, 3412A, , there are also ISUZU,NAVISTAR and FORD G2.8/G2.9 as well. HEUI tester is a necessary equipment to test above mentioned HEUI injectors. This tester is affordable, with very convenient adaptors for HEUI injectors, which is easy and quick in mounting a HEUI injecrtor on the tester. Main Features : ♦ Easy Operate & Maintain: Quick adaptor change & mounting Automatically testing ♦ Fast Testing: 더 보기
디젤 인젝터 교정 테스트용 CAT C7 C9 3126 HEUI 인젝터 테스터
Carter C7 C9 is the most common HEUI injector, it could be calibrated on a HEUI Injector Tester. How to test a CAT C7 C9 injector on a HEUI Injector Tester? the latest design of adaptor, makes it very easy to mount the C7 C9 on injector tester. 2. Choose correct injector number in the database, then start the testing. 3. The testing result would be displayed on the computer screen after around 5 minutes. 더 보기
CAT C7 C9 C3126 단위 캘리브레이션을 위한 전자 제어 HEUI 주입기 검사기
What is HEUI fuel injection system? The HEUI system (Hydraulic Electronic Unit Injector) is a medium-pressure common rail, electronically controlled hydraulic injection system developed by C-aterpillar in the United States. Its core feature is the use of engine oil as the hydraulic medium, combined with electronic control and hydraulic actuation to achieve high-pressure fuel injection. Technical Features Hydraulic Actuation : Medium-pressure (approximately 20-30 MPa) 더 보기
디젤 연료 주입 펌프 테스트 벤치 22KW 스테인리스 듀얼 탱크 공기 압축기
It is a high end Diesel Injection Pump Tester, equipped with a 22kw AC main motor, two stainless steel fuel tanks with two individual motors, beside, there is an air compressor with the tester. except testing mechanical Inline & Rotary injection pump, could also test RED4 pump, Generator electronically controlled governor pump, and check ZME/SCV/IMV valve of electronic pump. MAIN FUNCTIONS: 1 Test conventional mechanical Inline & Rotary injection pump. 2 Test RED4 pump 3 Test 더 보기
KMW A B P 시리즈의 기계 디젤 연료 주입 펌프 시험 벤치
Diesel injection pump tester is basic equipment for a diesel injection laboratory, used to test mechanical injection pump. It could test inline pumps of K, M, MW, A, B, BV, P (ZU, ZW, ZM) and rotor distributor injection pumps EP/VA, EP/VM, VE.F etc. TECHNICAL PARAMETER : 1 Output power: 7.5/11/15/18.5/22 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 or 12 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 800kg 7 Packing Dimension: (H*W*L) 2140*1100*1820 mm 더 보기
인라인 로터리 펌프 수동 테스트를 위한 8개의 실린더 디젤 펌프 테스트 벤치
A 8 Cylinder Diesel Pump Tester is the most affordable diesel pump tester for a diesel service workshop. It is used for manually testing inline and rotatory diesel injection pump. TECHNICAL CHARACTERISTICS: 1 Output power: 7.5 KW 2 Cylinders: 8 cylinders 3 RPM: 0-4000 4 Operation Type: Manual 5 Applicable Pump Type: Inline pumps of K, M, MW, A, B, BV, P (ZU, ZW, ZM) and rotor distributor injection pumps EP/VA, EP/VM, VE.F etc. 더 보기
8 실린더 디젤 연료 주입 펌프 시험 벤치 7.5KW 직선 회전
The smallest injection pump tester is 8 cylinders, which is 7.5kw. It has a small size, could test inline and rotatory injection pump, highly reliable and affordable. TECHNICAL PARAMETER: 1 Output power: 7.5 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 650kg 7 Dimension: (H*W*L) 1700*800*800 mm 더 보기
