english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
8 सिलेंडर डीजल ईंधन इंजेक्शन पंप परीक्षण बेंच 7.5KW इनलाइन रोटरी
The smallest injection pump tester is 8 cylinders, which is 7.5kw. It has a small size, could test inline and rotatory injection pump, highly reliable and affordable. TECHNICAL PARAMETER: 1 Output power: 7.5 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 650kg 7 Dimension: (H*W*L) 1700*800*800 mm और पढ़ें
स्टेनलेस स्टील टैंक के साथ डीजल इंजेक्शन पंप परीक्षण बेंच एयर कंप्रेसर
The first class components are equipped on this Diesel Injection Pump Tester, including three motors, two stainless steel fuel tanks and air compressor. Applicable injection pumps inclduing Inline & Rotary pumps, Generator electronically controlled governor pumps, RED4 pumps, and check ZME/SCV/IMV valve of electronic pumps. TECHNICAL CHARACTERISTICS: 1 Output power: 22 KW 2 Power voltage: 220V/380V 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 Motor: AC motor 6 Pressure: 2.5 Mpa और पढ़ें
मैकेनिकल इंजेक्शन पंप अंशांकन के लिए 12 सिलेंडर ईंधन इंजेक्शन पंप परीक्षण बेंच
12 Cylinder Fuel Injection Tester, highly reliable, quality and performance proved by the market, do very good in calibrating conventional diesel fuel inejction pumps, including mechanical injection pumps and distribution pumps. TECHNICAL CHARACTERISTICS: 1 Testing Mode: Manual / Model 2 Output power: 15 KW 3 Cylinders: 12 cylinders 4 Speed Control: Continuously variable speed Multiple speed presets 5 Applicalbe Pump: Ⅰ,Ⅱ,Ⅲ,A ,B ,P ,VE ,IW ,PL ,BQ ,Z ,P7 ,PW ,PN ,PB ,P2000 और पढ़ें
बड़े इंजन पंप के कैलिब्रेशन के लिए 45KW डीजल इंजेक्शन पंप परीक्षण बेंच
It is a 45kw super diesel test bench, for calibration of fuel injectors and injection pumps of heavy duty machinery and generator set. The best solution for testing heavy duty injection pumps, like QSK19, QSK38, QSK60, QSK50, MTU2000 new and old style, MTU4000 new and old style etc. TECHNICAL PARAMETER : 1 Output power: 45 KW 2 Power voltage: 380V 3 RPM: 0-4000 4 Speed Control: Frequency Converter 5 Max. Rail Pressure: 2700 bar 6 Diesel tank capacity: 40L 7 Weight: 1934kg 8 और पढ़ें
इनलाइन वीई पंप परीक्षण के लिए वैरिएबल स्पीड डीजल ईंधन इंजेक्शन पंप परीक्षण बेंच
Highly reliable diesel fuel injection pump test bench, widely used to test mechanical inline injection pump and VE injection pumps. Main Functions : 1 Cylinder fuel delivery measurement at different speed. 2 Fuel supply point and fuel supply interval angle of injection pump. 3 Mechanical governor checking and adjusting. 4 Distributor pump checking and adjusting. 5 Boost compensator performance t esting and adjusting. 6 Distributor pump fuel return m easurement. 7 Distributor और पढ़ें
मैकेनिकल डीजल ईंधन इंजेक्शन पंप टेस्ट बेंच 7.5KW से 22KW 220V 380V
The Mechanical Injection Pump Test Bench with different power from 7.5kw to 22kw, used for testing mechanical diesel injeciton pump. It has 8 cylinders and 12 cylinders for optional, 220v and 380v voltage was available for different countries. Main Functions : 1 Measure fuel delivery of every cylinder at different speed. 2 Test point and interval angle of fuel supply of injection pump. 3 Check & adjust the mechanical governor. 4 Check & adjust the distributor pump. 5 Test and और पढ़ें
टाइमिंग मात्रा नियंत्रण के साथ इलेक्ट्रॉनिक डीजल ईंधन इंजेक्शन पंप परीक्षण बेंच
The diesel engine electronic fuel injection system electronically controls the timing and quantity of fuel injection, ensuring optimal operation under all operating conditions. Advantages of Electronic Fuel Injection Technology: 1. Improved fuel efficiency : By precisely controlling injection parameters, the combustion process is optimized, reducing fuel consumption.2. Reduced emissions : Precise injection control contributes to cleaner combustion and effectively reduces और पढ़ें
इनलाइन और वीई पंप परीक्षण के लिए मैकेनिकल डीजल इंजेक्शन पंप परीक्षण बेंच
Diesel Test bench for Traditional Mechanical Injection Pump, used for testing traditional mechanical inline pumps, as well as VE pumps, which are characterized by stability and reliability. TECHNICAL PARAMETER : 1 Output power: 11 KW 2 Power voltage: 220V/380V 50/60HZ 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Fuel Supply Pressure: High pressure: 0-60bar Low pressure: 0-6bar Inside pressure: 0-16bar 7 Drive Shaft Center Height: 125mm 8 Weight: 810kg और पढ़ें
प्लंगर रोटरी सिस्टम के लिए इनलाइन वीई डीजल इंजेक्शन पंप परीक्षण बेंच
Mechanical inline pumps and VE rotary pumps are the two most classic fuel injection pump systems in traditional diesel engines. 1. Mechanical Inline Pump: • One row of plungers, one plunger per cylinder. • Representatives: B-osch PE, PW, P-type pumps; used in older Changchai/Xichai/Yuchai/Weichai engines. • Structure: Plunger + Delivery Valve + Camshaft + Governor 2. VE Rotary Pump: • Only one plunger, rotating to distribute fuel to each cylinder. • Representatives: B-osch VE और पढ़ें
