english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
8 กระบอก น้ํามันดีเซล ปั๊มฉีด ปั๊มทดสอบ 7.5KW Inline Rotary
The smallest injection pump tester is 8 cylinders, which is 7.5kw. It has a small size, could test inline and rotatory injection pump, highly reliable and affordable. TECHNICAL PARAMETER: 1 Output power: 7.5 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 650kg 7 Dimension: (H*W*L) 1700*800*800 mm อ่านเพิ่มเติม
เบนจ์การทดสอบปั๊มฉีดดีเซลที่มีถังเหล็กไร้ขุ่น เครื่องบดอากาศ
The first class components are equipped on this Diesel Injection Pump Tester, including three motors, two stainless steel fuel tanks and air compressor. Applicable injection pumps inclduing Inline & Rotary pumps, Generator electronically controlled governor pumps, RED4 pumps, and check ZME/SCV/IMV valve of electronic pumps. TECHNICAL CHARACTERISTICS: 1 Output power: 22 KW 2 Power voltage: 220V/380V 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 Motor: AC motor 6 Pressure: 2.5 Mpa อ่านเพิ่มเติม
12 ซิลินเดอร์ ปั๊มฉีดน้ํามัน เบนจ์การทดสอบสําหรับปรับระดับปั๊มฉีดเครื่องกล
12 Cylinder Fuel Injection Tester, highly reliable, quality and performance proved by the market, do very good in calibrating conventional diesel fuel inejction pumps, including mechanical injection pumps and distribution pumps. TECHNICAL CHARACTERISTICS: 1 Testing Mode: Manual / Model 2 Output power: 15 KW 3 Cylinders: 12 cylinders 4 Speed Control: Continuously variable speed Multiple speed presets 5 Applicalbe Pump: Ⅰ,Ⅱ,Ⅲ,A ,B ,P ,VE ,IW ,PL ,BQ ,Z ,P7 ,PW ,PN ,PB ,P2000 อ่านเพิ่มเติม
เบนจ์ทดสอบปั๊มฉีดน้ํามันดีเซลขนาด 45KW สําหรับการปรับขนาดปั๊มเครื่องยนต์ขนาดใหญ่
It is a 45kw super diesel test bench, for calibration of fuel injectors and injection pumps of heavy duty machinery and generator set. The best solution for testing heavy duty injection pumps, like QSK19, QSK38, QSK60, QSK50, MTU2000 new and old style, MTU4000 new and old style etc. TECHNICAL PARAMETER : 1 Output power: 45 KW 2 Power voltage: 380V 3 RPM: 0-4000 4 Speed Control: Frequency Converter 5 Max. Rail Pressure: 2700 bar 6 Diesel tank capacity: 40L 7 Weight: 1934kg 8 อ่านเพิ่มเติม
เบนจ์ทดสอบปั๊มฉีดน้ํามันดีเซลความเร็วแปรสําหรับการทดสอบปั๊ม VE ในสาย
Highly reliable diesel fuel injection pump test bench, widely used to test mechanical inline injection pump and VE injection pumps. Main Functions : 1 Cylinder fuel delivery measurement at different speed. 2 Fuel supply point and fuel supply interval angle of injection pump. 3 Mechanical governor checking and adjusting. 4 Distributor pump checking and adjusting. 5 Boost compensator performance t esting and adjusting. 6 Distributor pump fuel return m easurement. 7 Distributor อ่านเพิ่มเติม
ม้านั่งทดสอบปั๊มฉีดเชื้อเพลิงดีเซลแบบเครื่องกล 7.5KW ถึง 22KW 220V 380V
The Mechanical Injection Pump Test Bench with different power from 7.5kw to 22kw, used for testing mechanical diesel injeciton pump. It has 8 cylinders and 12 cylinders for optional, 220v and 380v voltage was available for different countries. Main Functions : 1 Measure fuel delivery of every cylinder at different speed. 2 Test point and interval angle of fuel supply of injection pump. 3 Check & adjust the mechanical governor. 4 Check & adjust the distributor pump. 5 Test and อ่านเพิ่มเติม
เบนจ์ทดสอบปั๊มฉีดน้ํามันดีเซลแบบอิเล็กทรอนิกส์ที่มีการควบคุมปริมาณเวลา
The diesel engine electronic fuel injection system electronically controls the timing and quantity of fuel injection, ensuring optimal operation under all operating conditions. Advantages of Electronic Fuel Injection Technology: 1. Improved fuel efficiency : By precisely controlling injection parameters, the combustion process is optimized, reducing fuel consumption.2. Reduced emissions : Precise injection control contributes to cleaner combustion and effectively reduces อ่านเพิ่มเติม
เบนจ์ทดสอบปั๊มฉีดน้ํามันดีเซลกลสําหรับการทดสอบปั๊มในสายและ VE
Diesel Test bench for Traditional Mechanical Injection Pump, used for testing traditional mechanical inline pumps, as well as VE pumps, which are characterized by stability and reliability. TECHNICAL PARAMETER : 1 Output power: 11 KW 2 Power voltage: 220V/380V 50/60HZ 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Fuel Supply Pressure: High pressure: 0-60bar Low pressure: 0-6bar Inside pressure: 0-16bar 7 Drive Shaft Center Height: 125mm 8 Weight: 810kg อ่านเพิ่มเติม
เบนจ์ทดสอบปั๊มฉีดน้ํามันดีเซลในสาย VE สําหรับระบบหมุนพลุง
Mechanical inline pumps and VE rotary pumps are the two most classic fuel injection pump systems in traditional diesel engines. 1. Mechanical Inline Pump: • One row of plungers, one plunger per cylinder. • Representatives: B-osch PE, PW, P-type pumps; used in older Changchai/Xichai/Yuchai/Weichai engines. • Structure: Plunger + Delivery Valve + Camshaft + Governor 2. VE Rotary Pump: • Only one plunger, rotating to distribute fuel to each cylinder. • Representatives: B-osch VE อ่านเพิ่มเติม
