english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
8 실린더 디젤 연료 주입 펌프 시험 벤치 7.5KW 직선 회전
The smallest injection pump tester is 8 cylinders, which is 7.5kw. It has a small size, could test inline and rotatory injection pump, highly reliable and affordable. TECHNICAL PARAMETER: 1 Output power: 7.5 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 650kg 7 Dimension: (H*W*L) 1700*800*800 mm 더 보기
스테인리스 스틸 탱크 공기 압축기와 디젤 주입 펌프 시험 벤치
The first class components are equipped on this Diesel Injection Pump Tester, including three motors, two stainless steel fuel tanks and air compressor. Applicable injection pumps inclduing Inline & Rotary pumps, Generator electronically controlled governor pumps, RED4 pumps, and check ZME/SCV/IMV valve of electronic pumps. TECHNICAL CHARACTERISTICS: 1 Output power: 22 KW 2 Power voltage: 220V/380V 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 Motor: AC motor 6 Pressure: 2.5 Mpa 더 보기
12 실린더 연료 주입 펌프 기계 주입 펌프 캘리브레이션을 위한 시험 벤치
12 Cylinder Fuel Injection Tester, highly reliable, quality and performance proved by the market, do very good in calibrating conventional diesel fuel inejction pumps, including mechanical injection pumps and distribution pumps. TECHNICAL CHARACTERISTICS: 1 Testing Mode: Manual / Model 2 Output power: 15 KW 3 Cylinders: 12 cylinders 4 Speed Control: Continuously variable speed Multiple speed presets 5 Applicalbe Pump: Ⅰ,Ⅱ,Ⅲ,A ,B ,P ,VE ,IW ,PL ,BQ ,Z ,P7 ,PW ,PN ,PB ,P2000 더 보기
대형 엔진 펌프 캘리브레이션을 위한 45KW 디젤 주입 펌프 시험 벤치
It is a 45kw super diesel test bench, for calibration of fuel injectors and injection pumps of heavy duty machinery and generator set. The best solution for testing heavy duty injection pumps, like QSK19, QSK38, QSK60, QSK50, MTU2000 new and old style, MTU4000 new and old style etc. TECHNICAL PARAMETER : 1 Output power: 45 KW 2 Power voltage: 380V 3 RPM: 0-4000 4 Speed Control: Frequency Converter 5 Max. Rail Pressure: 2700 bar 6 Diesel tank capacity: 40L 7 Weight: 1934kg 8 더 보기
직렬 VE 펌프 테스트를 위한 변속 디젤 연료 주입 펌프 시험 벤치
Highly reliable diesel fuel injection pump test bench, widely used to test mechanical inline injection pump and VE injection pumps. Main Functions : 1 Cylinder fuel delivery measurement at different speed. 2 Fuel supply point and fuel supply interval angle of injection pump. 3 Mechanical governor checking and adjusting. 4 Distributor pump checking and adjusting. 5 Boost compensator performance t esting and adjusting. 6 Distributor pump fuel return m easurement. 7 Distributor 더 보기
기계 디젤 연료 주입 펌프 시험 벤치 7.5KW ~ 22KW 220V 380V
The Mechanical Injection Pump Test Bench with different power from 7.5kw to 22kw, used for testing mechanical diesel injeciton pump. It has 8 cylinders and 12 cylinders for optional, 220v and 380v voltage was available for different countries. Main Functions : 1 Measure fuel delivery of every cylinder at different speed. 2 Test point and interval angle of fuel supply of injection pump. 3 Check & adjust the mechanical governor. 4 Check & adjust the distributor pump. 5 Test and 더 보기
시간량 제어 장치와 함께 전자 디젤 연료 주입 펌프 시험 벤치
The diesel engine electronic fuel injection system electronically controls the timing and quantity of fuel injection, ensuring optimal operation under all operating conditions. Advantages of Electronic Fuel Injection Technology: 1. Improved fuel efficiency : By precisely controlling injection parameters, the combustion process is optimized, reducing fuel consumption.2. Reduced emissions : Precise injection control contributes to cleaner combustion and effectively reduces 더 보기
직렬 및 VE 펌프 테스트를 위한 기계 디젤 주입 펌프 시험 벤치
Diesel Test bench for Traditional Mechanical Injection Pump, used for testing traditional mechanical inline pumps, as well as VE pumps, which are characterized by stability and reliability. TECHNICAL PARAMETER : 1 Output power: 11 KW 2 Power voltage: 220V/380V 50/60HZ 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Fuel Supply Pressure: High pressure: 0-60bar Low pressure: 0-6bar Inside pressure: 0-16bar 7 Drive Shaft Center Height: 125mm 8 Weight: 810kg 더 보기
플랑저 회전 시스템을 위한 직선 VE 디젤 주사 펌프 시험 벤치
Mechanical inline pumps and VE rotary pumps are the two most classic fuel injection pump systems in traditional diesel engines. 1. Mechanical Inline Pump: • One row of plungers, one plunger per cylinder. • Representatives: B-osch PE, PW, P-type pumps; used in older Changchai/Xichai/Yuchai/Weichai engines. • Structure: Plunger + Delivery Valve + Camshaft + Governor 2. VE Rotary Pump: • Only one plunger, rotating to distribute fuel to each cylinder. • Representatives: B-osch VE 더 보기
