english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
船舶用発電機トラックインジェクター校正用ディーゼルポンプ校正機
This Diesel Calibration Machine is multifunctional and economical. Specially used for calibrating diesel fuel injectors which used on marine engine, generator, truck, and other heavy equipments. TECHNICAL PARAMETER : 1 Output power: 22 KW 2 Power voltage: 380V, 3 Phase, 4 Wires 3 RPM: 0-4000 4 Speed Control Mode: Frequency Converter 5 Max. Rail Pressure: 2700 bar 6 Oil tank capacity: 20L 7 Diesel tank capacity: 40L 8 Weight: 1200kg 9 Dimension: (H*W*L) 2200*1150*1790mm もっと読む
CAT 320D 噴射ポンプ コモン レール テスト ベンチ CR518 ディーゼル電子診断
CAT 320D Injection Pump is ok to be tested on a Common Rail Diesel Test Bench. How to test a CAT320D Injection Pump on a common rail diesel test bench? 320D pump no. 326-4635 Mount the CAT320D pump on the common rail diesel test bench well. Connect high pressure pipes, cables, and hoses properly. 3. Correct pump number could be found in the testing software, choose it and run the testing. 4. After testing finish, you will get the test result and report. もっと読む
ディーゼル燃料注入ポンプテストベンチ 22KWステンレスダブルタンク空気圧縮機
It is a high end Diesel Injection Pump Tester, equipped with a 22kw AC main motor, two stainless steel fuel tanks with two individual motors, beside, there is an air compressor with the tester. except testing mechanical Inline & Rotary injection pump, could also test RED4 pump, Generator electronically controlled governor pump, and check ZME/SCV/IMV valve of electronic pump. MAIN FUNCTIONS: 1 Test conventional mechanical Inline & Rotary injection pump. 2 Test RED4 pump 3 Test もっと読む
ディーゼルポンプ校正機 22KW インラインVEポンプ試験用
With a very powerful 22kw motor, this diesel calibration machine is specially for calibrating disel injection pump, inlcuding conventional inline injection pump and VE pump. With extra testing device, it could also test CAT HEUI pump and EUI EUP. TECHNICAL CHARACTERISTICS: 1 Testing Mode: Manual 2 Output power: 22 KW 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 Fuel Tanks: Diesel Tank & Oil Tank 6 Weight: 900kgs 7 Length*Width*Height 2330*1450*2126mm もっと読む
ミニディーゼルポンプ校正機 7.5KW 8シリンダーインライン回転
Mini Diesel Pump Tester is the smallest diesel pump tester, affordable for a diesel lab. It is 8 cylinders, 7.5kw, could test inline and rotatory injection pump. TECHNICAL CHARACTERISTICS: 1 Output power: 7.5 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 cylinders 4 RPM: 0-4000 5 RPM pre-set: Yes 6 DC power supply: Yes 7 Internal Pressure of VE pump: Yes 8 Oil Return of VE pump: Yes もっと読む
8シリンダーディーゼルポンプ試験台 インライン回転ポンプの手動試験
A 8 Cylinder Diesel Pump Tester is the most affordable diesel pump tester for a diesel service workshop. It is used for manually testing inline and rotatory diesel injection pump. TECHNICAL CHARACTERISTICS: 1 Output power: 7.5 KW 2 Cylinders: 8 cylinders 3 RPM: 0-4000 4 Operation Type: Manual 5 Applicable Pump Type: Inline pumps of K, M, MW, A, B, BV, P (ZU, ZW, ZM) and rotor distributor injection pumps EP/VA, EP/VM, VE.F etc. もっと読む
VE インライン ロータリー ポンプ校正用ディーゼル インジェクション ポンプ テスト スタンド
Conventional Injection Pump Tester is specially for conventional inline injection pump and rotary pump, inlcuding VE pump. This diesel tester features of highly relaible, durable, and easy-maintenance. Main Configuration : 1 Multi-function control box 2 1 main 22 kw motor, 2 small motors for tanks 3 2 stainless steel tanks, one for fuel and one for oil 4 Air compressor もっと読む
VEインライン回転ポンプ校正用の注射ポンプ試験台
This Conventional Diesel Injection Pump Tester is equipped with the best standard injector in China, specially for calibration of conventional inline injection pump and rotary pump, inlcuding VE pump. Mainly Functions: • Check and adjust the performance of mechanical speed controller. • The sealing inspection of pump body. • The test of solenoid valve of distribution pump. • The test of return oil of distribution pump. • Measure the interior pressure of distribution pump. • もっと読む
KMW A B P シリーズ用の機械式ディーゼル燃料注入ポンプ試験台
Diesel injection pump tester is basic equipment for a diesel injection laboratory, used to test mechanical injection pump. It could test inline pumps of K, M, MW, A, B, BV, P (ZU, ZW, ZM) and rotor distributor injection pumps EP/VA, EP/VM, VE.F etc. TECHNICAL PARAMETER : 1 Output power: 7.5/11/15/18.5/22 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 or 12 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 800kg 7 Packing Dimension: (H*W*L) 2140*1100*1820 mm もっと読む
