english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
해양 발전기 트럭 주입기 정렬용 디젤 펌프 정렬 기계
This Diesel Calibration Machine is multifunctional and economical. Specially used for calibrating diesel fuel injectors which used on marine engine, generator, truck, and other heavy equipments. TECHNICAL PARAMETER : 1 Output power: 22 KW 2 Power voltage: 380V, 3 Phase, 4 Wires 3 RPM: 0-4000 4 Speed Control Mode: Frequency Converter 5 Max. Rail Pressure: 2700 bar 6 Oil tank capacity: 20L 7 Diesel tank capacity: 40L 8 Weight: 1200kg 9 Dimension: (H*W*L) 2200*1150*1790mm 더 보기
CAT 320D 분사 펌프 커먼 레일 테스트 벤치 CR518 디젤 전자 진단
CAT 320D Injection Pump is ok to be tested on a Common Rail Diesel Test Bench. How to test a CAT320D Injection Pump on a common rail diesel test bench? 320D pump no. 326-4635 Mount the CAT320D pump on the common rail diesel test bench well. Connect high pressure pipes, cables, and hoses properly. 3. Correct pump number could be found in the testing software, choose it and run the testing. 4. After testing finish, you will get the test result and report. 더 보기
디젤 연료 주입 펌프 테스트 벤치 22KW 스테인리스 듀얼 탱크 공기 압축기
It is a high end Diesel Injection Pump Tester, equipped with a 22kw AC main motor, two stainless steel fuel tanks with two individual motors, beside, there is an air compressor with the tester. except testing mechanical Inline & Rotary injection pump, could also test RED4 pump, Generator electronically controlled governor pump, and check ZME/SCV/IMV valve of electronic pump. MAIN FUNCTIONS: 1 Test conventional mechanical Inline & Rotary injection pump. 2 Test RED4 pump 3 Test 더 보기
인라인 VE 펌프 테스트용 디젤 펌프 교정 기계 22KW
With a very powerful 22kw motor, this diesel calibration machine is specially for calibrating disel injection pump, inlcuding conventional inline injection pump and VE pump. With extra testing device, it could also test CAT HEUI pump and EUI EUP. TECHNICAL CHARACTERISTICS: 1 Testing Mode: Manual 2 Output power: 22 KW 3 Cylinders: 12 cylinders 4 RPM: 0-4000 5 Fuel Tanks: Diesel Tank & Oil Tank 6 Weight: 900kgs 7 Length*Width*Height 2330*1450*2126mm 더 보기
미니 디젤 펌프 교정 기계 7.5KW 8 실린더 인라인 로터리
Mini Diesel Pump Tester is the smallest diesel pump tester, affordable for a diesel lab. It is 8 cylinders, 7.5kw, could test inline and rotatory injection pump. TECHNICAL CHARACTERISTICS: 1 Output power: 7.5 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 cylinders 4 RPM: 0-4000 5 RPM pre-set: Yes 6 DC power supply: Yes 7 Internal Pressure of VE pump: Yes 8 Oil Return of VE pump: Yes 더 보기
인라인 로터리 펌프 수동 테스트를 위한 8개의 실린더 디젤 펌프 테스트 벤치
A 8 Cylinder Diesel Pump Tester is the most affordable diesel pump tester for a diesel service workshop. It is used for manually testing inline and rotatory diesel injection pump. TECHNICAL CHARACTERISTICS: 1 Output power: 7.5 KW 2 Cylinders: 8 cylinders 3 RPM: 0-4000 4 Operation Type: Manual 5 Applicable Pump Type: Inline pumps of K, M, MW, A, B, BV, P (ZU, ZW, ZM) and rotor distributor injection pumps EP/VA, EP/VM, VE.F etc. 더 보기
VE 직렬 회전 펌프 캘리브레이션을 위한 디젤 주사 펌프 시험 스탠드
Conventional Injection Pump Tester is specially for conventional inline injection pump and rotary pump, inlcuding VE pump. This diesel tester features of highly relaible, durable, and easy-maintenance. Main Configuration : 1 Multi-function control box 2 1 main 22 kw motor, 2 small motors for tanks 3 2 stainless steel tanks, one for fuel and one for oil 4 Air compressor 더 보기
VE 직렬 회전 펌프 캘리브레이션을 위한 주사 펌프 시험 벤치
This Conventional Diesel Injection Pump Tester is equipped with the best standard injector in China, specially for calibration of conventional inline injection pump and rotary pump, inlcuding VE pump. Mainly Functions: • Check and adjust the performance of mechanical speed controller. • The sealing inspection of pump body. • The test of solenoid valve of distribution pump. • The test of return oil of distribution pump. • Measure the interior pressure of distribution pump. • 더 보기
KMW A B P 시리즈의 기계 디젤 연료 주입 펌프 시험 벤치
Diesel injection pump tester is basic equipment for a diesel injection laboratory, used to test mechanical injection pump. It could test inline pumps of K, M, MW, A, B, BV, P (ZU, ZW, ZM) and rotor distributor injection pumps EP/VA, EP/VM, VE.F etc. TECHNICAL PARAMETER : 1 Output power: 7.5/11/15/18.5/22 KW 2 Power voltage: 220V/380V 3 Cylinders: 8 or 12 cylinders 4 RPM: 0-4000 5 DC power supply: 12V, 24V 6 Weight: 800kg 7 Packing Dimension: (H*W*L) 2140*1100*1820 mm 더 보기
